TANDBERG CODIAN 2200 Manuel D’Utilisation

 

21 

A status indication is displayed in the bottom left-hand corner of the recording console. It shows 
the current state of recording. When you first enter the recording console, the status indication 
will show paused. 

The length of the recording is shown in the bottom right-hand corner of the screen, as minutes 
and seconds. When you first enter the recording console, this will show a zero-length recording. 
The recording length will update in real-time as recording progresses. Use this as a guide to how 
long your recording will be. 

The recording indicator is shown only whilst recording is in progress, and hence will not be 
visible when you first enter the recording console. When you start recording, this indicator will 
blink near the top right-hand corner of the screen. 

When you first enter the recording console, you will hear audio instructions on which controls you may use. Recording 
will not start until you are ready. Refer to the table below for details: 

Starts recording. The status line will change from 
paused to resuming... then to recording. 

When you start recording, the IP VCR waits for a 
suitable moment before actually starting to record. 
This is to ensure the best possible quality video is 
recorded. During this time the status line shows 
resuming.... Be sure to wait until the status line says 
recording before starting to speak. 

Stops recording. The status line will change from 
recording to finished. 

When you have finished recording, you will not be 
disconnected from the IP VCR unless you hang up 
the call. 

Note that even when you have finished recording, 
IP VCR resources are still in use until the call is 
ended, possibly preventing other users from 
making recordings in the meantime. 

You do not have to explicitly stop recording. If you wish, you may simply hang up the call when you have finished. 
Whether you press stop or simply hang up, the recording will be automatically stored by the IP VCR.