TANDBERG CODIAN 2200 Manuel D’Utilisation

 

61 

You can configure the Codian IP VCR with one or more H.323 gateways: 

• 

To add an H.323 gateway, go to 

. After entering the settings described 

below, click 

.  

• 

To update an existing H.323 gateway, go to 

 and click on a gateway name. After updating the settings 

described below, click 

.  

The descriptive name of the gateway.  

All gateways must have a unique name.  

The IP address or host name of the gateway. 

  

Choose whether to use the unit-wide setting for 
motion/sharpness trade off, or configure an 
individual setting for this gateway. Choose from:  

• 

Use unit-wide setting: this is the default 
value. In this case, connections to the 
gateway will use the motion/sharpness 
tradeoff setting from the 

 page 

• 

Favor motion: the IP VCR will try and use a 
high frame rate. That is, the IP VCR will 
strongly favor a resolution of at least 25 
frames per second 

• 

Favor sharpness: the IP VCR will use the 
highest resolution that is appropriate for 
what is being viewed 

• 

Balanced: the IP VCR will select settings 
that balance resolution and frame rate 
(where the frame rate will not be less than 
12 frames per second) 

The settings for motion (frames per second) and 
sharpness (frame size or resolution) are negotiated 
between the endpoint and the IP VCR. This setting 
controls how the IP VCR will negotiate the settings 
to be used with this endpoint. 

The network capacity (measured in bits per second) 
used by the media channels established by the IP 
VCR to a single participant. 

  

Sets the bandwidth that the endpoint will advertise 
to the IP VCR when it calls it.