TANDBERG Hub Manuel D’Utilisation

TANDBERG 3G Gateway User Manual 

 

 
Video Portal Settings 
Video Portal Mode 

When set to “Off” the 3G gateway will operate standalone. 
However, if it needs to be configured in tandem operation with a 
Video Portal the mode has to be set to “On”.  

 

 
Note that setting the Video Portal Mode “On” all H323, SIP related tabs as well as the Service 
Configuration tab will disappear from the window (See figure below). 
 

 

 

 
Video Portal Systems 
Primary system address 

Enter the IP Address of the Video Portal the 3G Gateway should 
register to. 

Backup system address 

Enter the IP Address of the backup Video Portal the 3G Gateway 
should register to. 

 
Save 
When ready to store the new settings, press ‘Save’. These settings will take effect when the 
system has been restarted. 
 
Restart 
This button will restart the 3G Gateway. Any changes made with respect to the Video Portal 
settings of the 3G Gateway will take effect after the system has been restarted.

42