TANDBERG Telepresence T3 Manuel D’Utilisation
PAGE 54/58
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
TANDBERG
Telepresence T3
11.
Unscrew the screws holding the brackets (marked in orange in picture be-
low) in the left column.
12.
Find the TCU in the box marked ’T3 Telepresence kit w/ TCU & screens’ and
fasten the TCU to the left column, using the bracket and the same screws as
were just loosened. (The TCU is marked in green in the picture below). Con-
nect the cables to the TCU.
fasten the TCU to the left column, using the bracket and the same screws as
were just loosened. (The TCU is marked in green in the picture below). Con-
nect the cables to the TCU.
mountinG thE tCu
tip!
Put on the rubber legs on the units
before they are mounted. Otherwise
you will not be able to fasten the screws
completely!
you will not be able to fasten the screws
completely!