TANDBERG 1700 MXP Manuel D’Utilisation
D 13954.01
JUNE 2006
JUNE 2006
22
TANDBERG 1700
MXP
USER GUIDE
What Happens When You Press a Key on the Numerical Keypad?
That depends on the context. The following guidelines apply:
Pressing a
Numerical
key when outside a call will produce the
Call
menu.
Once positioned inside an entry field requiring alphanumeric entries, the
system automatically goes to
system automatically goes to
ABC
mode. Entering letters is similar to a
cellular phone – see right.
Once positioned inside an entry field requiring numerical entries, the sys-
tem automatically switches to
Once positioned inside an entry field requiring numerical entries, the sys-
tem automatically switches to
123
mode allowing numbers to be dialled
with the
Numerical
keys as usual.
•
•
•
•
Touch Tones
To activate dialling touch tones during a call, press the
Touch tones
button. An
indicator will let you know that
Touch tones
are enabled. Finish with
OK
to exit
Touch tone
mode.
Numerical Keypad Features
Using the Numerical Keypad in Alphanumerical Mode
Whenever alphanumerical entries are expected by the system,
a small
a small
abc
appears in the right lower corner of the entry field.
In this mode, entries from the
Numerical keypad
are automatically
interpreted as alphanumeric entries in the same way as on a cellular
phone.
phone.
Guidelines:
Press the key that corresponds to the required letter.
Press the key as many times as needed to access the
correct letter.
Change to lower or back to upper case letters with the
Press the key as many times as needed to access the
correct letter.
Change to lower or back to upper case letters with the
#
a/A
key,
and space with the
0 _
key.
To write numbers in a text input field, repeatedly press the
corresponding key a number of times until the digit appears.
corresponding key a number of times until the digit appears.
Example:
How do I write
System 123
in the
System Name
input field (in
General
in
Administrator Settings
)?
Do as follows:
Press the
7-key
four times to get an
S
.
Press the
#-key
once to switch between
upper case and lower case letters.
Press the
Press the
-key
three times to get a
y
.
Press the
7-key
four times to get an
s
.
Press the
8-key
once to get a
t
.
Press the
3-key
twice to get an
e
.
Press the
-key
once to get an
m
.
Press the
0-key
once to get
space
.
Press the
1-key
three times to get a
1
.
Press the
2-key
four times to get a
2
.
Press the
3-key
four times to get a
3
.
•
•
•
•
•
1.
2.
2.
3.
.
5.
.
7.
8.
.
10.
11.
.
5.
.
7.
8.
.
10.
11.
Touch tones
Snapshot
Presets
Touch tones
Snapshot
Presets
Getting Acquainted with the System
Using the Number Key Settings
When
Number Key Settings
is set to
Manual
(
Control Panel > Menu Settings
) a
menu will be displayed once you press a numerical key inside a call.
Select
Add another Call
to add participants
Select
Dial Extension Number
to dial
touch tones
Select
Select
Use Presets
to have the system
interpret the number as camera preset
addressing.
addressing.
If you are a power user, you may not want this menu to appear. It may
therefore be set to your preferred setting
therefore be set to your preferred setting
in the
Control Panel > Menu
Settings
.
Observe that the Control Panel may have been password protected by your
adminstrator.
adminstrator.
•
•
•
•