TANDBERG 1700 MXP Manuel D’Utilisation

D 13954.01
JUNE 2006

2

TANDBERG 1700 

USER GUIDE

Making Point-to-Point Video & Telephone Calls Manually

Call Handling



Select

Make a Call

from the menu,

or, press the green

Call

key on the remote control.

The TANDBERG system can make both Video calls and
Telephone calls. Telephone calls over IP may require
additional hardware and infrastructure. If in doubt contact
your administrator or your TANDBERG representative.

  

Do one of three things:

Place the call by pressing

OK

so that the

Place Call

icon is selected and press

OK

once again

 

Use the

Arrow

keys on the remote control to select the

Place Call

icon and press

OK

Press the green

Call

key on the remote control.

 

Make sure

Video Call

is selected (as shown here). If not,

see below for details.

 

Enter the dial number manually using the

Numerical 

Keypad. 

When dialling manually, observe the guidelines given in

Numerical Keypad Features

. Use

*

as separator in IP

addresses. If a system is registered on a gatekeeper or
border controller with DNS support, there are several
ways to call into the system:
<IP address>
<E.164>
<H.323 ID>
<H.323 ID>@<domain>
<E.164>@<domain>
See

H.323 Settings

for details

Touch tones 

Snapshot 

       Presets

Do as described above for a video call, but make sure

Telephone Call

is selected.

Making Video Calls Manually

Making Telephone Calls Manually

Choosing Between Video and Telephone Call

Use the

Arrow

keys, navigate

to the

Call Type

icon, and click

OK

. Select the type of call and

click

OK

to exit the submenu.