TANDBERG 1700 MXP Manuel D’Utilisation
D 13954.01
JUNE 2006
JUNE 2006
33
TANDBERG 1700
MXP
USER GUIDE
Answering an Incoming Call
Call Handling
Press the
OK
button on the remote control.
Press the the green
Call
button on the remote control.
•
•
•
Accept the incoming call
Reject the incoming call
This will not apply if
Do Not Disturb
has been activated, nor
will it apply if
Autoanswer
has been set to
On
or
On + Mic Off
Activate Do Not Disturb
Tip!
Whenever
Do Not Disturb
is activated, the far end will be
informed that the called is busy.
Want to Change the Video Alert Audio Signal?
You are not stuck with the audio signal alerting you that an
incoming call is on its way. This may be changed, see
incoming call is on its way. This may be changed, see
Audio
Settings
in the Control Panel section. Note that these settings
may be password protected by your adminstrator.
About Incoming Calls and Privacy
You may want to set up your system so that the microphone
is switched off whenever you receive an incoming call.
By pressing the
is switched off whenever you receive an incoming call.
By pressing the
Microphone Off
key you will prevent callers
from hearing you without your control (press again to acti-
vate).
To combine convenience and privacy, your system may be
set up to automatically accept an incoming call, but with the
microphone switched off. In this case you must switch the
microphone back on manually yourself (just press the
vate).
To combine convenience and privacy, your system may be
set up to automatically accept an incoming call, but with the
microphone switched off. In this case you must switch the
microphone back on manually yourself (just press the
Micro-
phone Off
key to reactivate a disabled microphone).
You may also have your system set up so that you always
must answer all incoming calls manually.
These settings are parts of the
must answer all incoming calls manually.
These settings are parts of the
Settings
(in Control Panel)
available. Your adminstrator, may or may not, have password
protection activated to prevent unauthorized alterations of
these and other settings. If in doubt, consult your adminstra-
tor.
protection activated to prevent unauthorized alterations of
these and other settings. If in doubt, consult your adminstra-
tor.
Note!
A message will be sent to the far end whenever you
have disabled your microphone and/or your camera.
Tip!
An alternative to the above could be the use of the
Do
Not Disturb
feature (far right).
Tip!
Whenever you receive an incoming call from someone
listed in your Phone Book, the caller’s identity will be shown
on the screen, just like in a cellular phone. For more on the
Phone Book, see
on the screen, just like in a cellular phone. For more on the
Phone Book, see
Phone Book Features
.
Touch tones
Snapshot
Presets
Touch tones
Snapshot
Presets
Touch tones
Snapshot
Presets
Touch tones
Snapshot
Presets
Call
button
OK
button
End Call
button
Select the
Reject
icon and press the
OK
button on the
remote control.
Press the
Press the
End Call
button on the remote control.
•
•
To Accept an Incoming Call
To Reject an Incoming Call
Incoming Calls will Produce the Below Menu
Using Do Not Disturb
There is a
Do Not Disturb
function available on your system.
When set to
on
, all incoming calls are blocked from your
system.
Use the feature as follows:
Outside a call, press the red
Call Reject
key (
Touch tones
Snapshot
Presets
).
Navigate to the
Do Not Disturb
icon:
Press
OK
to activate the feature. The screen will now turn
black, and the following text will appear:
Note!
Assume
Do Not Disturb
has not been activated. Choos-
ing
Do Not Disturb
(selecting the icon and then pressing
OK
)
when receiving an incoming call will then do two things: It re-
jects the incoming call (in the same way as choosing
jects the incoming call (in the same way as choosing
Reject
),
and sets the
Do Not Disturb
functionality to
ON
.