TANDBERG TC3.0 Manuel D’Utilisation
D14635.02—MARCH 2010
48
TANDBERG Codec C90 and Profiles using C90
Administrator guide
Contents
Introduction
Advanced configuration
Password protection
About monitors
Audio matters
Appendices
Contact us
www.tandberg.com
Video input matrix
Input Sources
Connector Name
1
1st Camera
HDMI 1
HD-SDI 1
YPrPb 1
2 2nd Camera
HDMI 2
HD-SDI 2
YPrPb 2
3
PC
HDMI 3
HD-SDI 3
DVI-I 3
4
HDMI 4
HD-SDI 4
–
5
DVI-I 5
Comp. 5
YC 5
The Video Input Matrix
The video input matrix is found at the rear side of the codec and
illustrates the combinations in which the video inputs can be
connected.
illustrates the combinations in which the video inputs can be
connected.
About the matrix
Only one video input source from each row can be active at any
time.
The numbers in the left column represents the Video Input
Sources 1–5. The main connectors, which are used in basic
setup, are marked in orange color.
The Comp. 5 and S-Video (YC) 5 inputs uses the same physical
connectors and can not be connected at the same time.
time.
The numbers in the left column represents the Video Input
Sources 1–5. The main connectors, which are used in basic
setup, are marked in orange color.
The Comp. 5 and S-Video (YC) 5 inputs uses the same physical
connectors and can not be connected at the same time.
Configure the video inputs
Go to the Advanced configuration menu on screen to configure
the video inputs.
the video inputs.
Navigate to: Settings > Advanced > Advanced Configurations >
Video > Input > Source 1. Configure the five video input sources:
Video > Input > Source 1. Configure the five video input sources:
•
Video Input Source [1–5] Connector: <HDMI/HDSDI/DVI/YC/
Composite/YPbPr> (the value space will differ by connector)
Composite/YPbPr> (the value space will differ by connector)
•
Video Input Source [1–5] Name: <Enter a name, and save>
•
Video Input Source [1–5] Quality: <Motion/Sharpness>
Navigate to: Settings > Advanced > Advanced Configurations
> Video. Configure the main video source and the default
presentation source for the system. The values <1–5> represents
the video input sources [1–5].
> Video. Configure the main video source and the default
presentation source for the system. The values <1–5> represents
the video input sources [1–5].
•
Video MainVideoSource: <1..5>
•
Video DefaultPresentationSource: <1..5>
Default configurations
•
Video Input Source 1 Connector: HDMI
•
Video Input Source 2 Connector: HDMI
•
Video Input Source 3 Connector: DVI
•
Video Input Source 4 Connector: HDMI
•
Video Input Source 5 Connector: DVI
•
Video Input Source 1 Name: “Main Camera“
•
Video Input Source 2 Name: “Secondary Camera“
•
Video Input Source 3 Name: “PC“
•
Video Input Source 4 Name: “DVD“
•
Video Input Source 5 Name: “Document Camera“
•
Video Input Source 1 Quality: Motion
•
Video Input Source 2 Quality: Motion
•
Video Input Source 3 Quality: Sharpness
•
Video Input Source 4 Quality: Motion
•
Video Input Source 5 Quality: Sharpness
•
Video MainVideoSource: 1 (which is the main camera)
•
Video DefaultPresentationSource: 3 (which is the PC)
Only one video input source from each
row can be active at any time.
row can be active at any time.
Contact us
Contents
Introduction
Advanced configuration
Password protection
About monitors
Audio matters
Appendices
Appendices