TANDBERG 7000 MXP Manuel D’Utilisation

TANDBERG 7000 MXP 

198 

 

 

 

Network 
Type 

Before using the system it is necessary to specify which network to use and 
define its settings. 
 

If you want to use your system via ISDN-BRI, you should select Network Type: 
ISDN-BRI and enter the ISDN BRI Settings menu to set the BRI parameters. 
 

ISDN-
PRI*  

If you want to use your system via ISDN-PRI, you should select Network Type: 
ISDN-PRI and enter the ISDN PRI Settings menu to set the PRI parameters. 
 

If you want to use your system via Leased E1/T1, you should select Network 
Type: Leased E1/T1 and enter the Leased E1/T1 Settings (see 

Leased E1/T1 

Settings

) menu to set the Leased E1/T1 parameters. 

 

If you want to use special networks and connect using RS449, V.35, X.21 or 
connect to ISDN via an external IMUX, you should select Network Type: External 
and enter the External Network Settings (see 

External Network Settings

 menu to 

set the External Network parameters. 
 

 
*Note that both Leased E1/T1 and ISDN-PRI uses the same interface on the codec marked 
E1/T1.