Orbit Manufacturing ORBIT 2000 Manuel D’Utilisation
Page 6 - 3
Applications
Orbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
3/
Load the sheet stack on the feed table. ( Described in Section 5 )
4/
Adhere one sheet of the same width as the sheets in the feeder to start the film web.
5/
Switch the compressor on and push the start button at it’s slowest speed.
6/
Stop the machine at the instant the first sheet passes under the chrome roller and the leading edge
of the paper appears to be at least 8 in. ( 200 mm ) past the contact area between the laminating
rollers.
rollers.
7/
Press the pressure up button.
8/
At the slowest speed of the machine, allow 2-3 sheets pass through the laminating rollers so you
can thread the web through the snapping section.
9/
Feed the web through the decurling bar.
10/
Feed the web through the pull rollers. ( Described in Section 5 )
11/
Feed the web through the twin knife assembly. ( Described in Section 5 )
12/
Feed the web through the snap rollers. ( Described in Section 5 )