Oregon S402022H0/S402022K0 Manuel D’Utilisation

Page 8

STEP 4:   Stand the beam (1) up on end. Two people may be needed for this step to ensure safety. Make sure that the    

    

    beam is stable and on a level surface.Remove the pivot pin (3) and clip pin (2) from the tank assembly.Roll the   

tongue/ tank assembly into position between the two tabs on the beam (1). Slide the pivot pin (3) through the  

   

    aligned holes and lock in place with the clip pin (2).

1 

    

 Beam   

 

1

2 

       

 1/2”-3/4” R Clip Pin 

1

3 

   

 Tank/Tongue Assembly      1

4 

 

  Pivot Pin 

 

1 

STEP 3: Attach the tongue assembly (5) to the tank assembly (1) using two 1/2” NC x 4-1/2” hex cap bolts (2), two 1/2”  

lock washers (3) and two and two 1/2” hex nuts (4). Tighten.

1 

 

Tank Assembly 

      

    

 1

2 

    

1/2” NC x 4-1/2 Hex Bolt       

 2

3 

               1/2” Lock Washer        

 

 2

4 

    

1/2” NC Hex Nut        

 

 2

5 

 

Tongue Assembly       

 

 1

 

5