Omnia Industries Food Processor Omnia One Multicast Stero Audio Processor with SENSUS Manuel D’Utilisation
General Purpose Interface (GPI) (DB-9F)
This DB9-female connector serves as a four-input, optoisolated interface to the Omnia's internal Trigger Script
functions. Four of the pins are “trigger” inputs, one is a bias voltage input, one is a +5V power output, and the
remaining three are “ground.” The trigger inputs can be used to dynamically alter the OmniaONE’s operation in
response to logic transitions on the interface connection. Virtually any parameter of the Omnia can be controlled
using the Trigger Scripts.
The Trigger Script Interface is a standard component of the OmniaONE Remote Control application. Full details,
including connector pinout, are covered in
functions. Four of the pins are “trigger” inputs, one is a bias voltage input, one is a +5V power output, and the
remaining three are “ground.” The trigger inputs can be used to dynamically alter the OmniaONE’s operation in
response to logic transitions on the interface connection. Virtually any parameter of the Omnia can be controlled
using the Trigger Scripts.
The Trigger Script Interface is a standard component of the OmniaONE Remote Control application. Full details,
including connector pinout, are covered in
, starting on Page 63.
*Please note that the Trigger Script functionality is not yet implemented in the current software but will be available
with a free downloadable software update. Please check the Omnia website for new software announcements,
download links and manual updates at:
DB-9M GPI “Interface” Connector
Powering Up
Now you are ready to power up the OmniaONE for the first time.
Connect AC power to the unit using the appropriate supplied power cable for your location.
(There is no power switch!)
When the OmniaONE is first powered on, audio will appear at the analog audio outputs in approximately ten
seconds. The AES/EBU outputs also become usable at this time however full initialization of the AES/EBU ports is
not complete for several more seconds and a small audio glitch may be heard when the final sample rate converter
initialization is complete. Once the boot process is finished the following Main Menu will appear:
Connect AC power to the unit using the appropriate supplied power cable for your location.
(There is no power switch!)
When the OmniaONE is first powered on, audio will appear at the analog audio outputs in approximately ten
seconds. The AES/EBU outputs also become usable at this time however full initialization of the AES/EBU ports is
not complete for several more seconds and a small audio glitch may be heard when the final sample rate converter
initialization is complete. Once the boot process is finished the following Main Menu will appear:
OmniaONE Multicast - Use and Operation Manual – Version 0.90
22