Quadra-Fire CASTILE-CE-MBK 7068-112 Manuel D’Utilisation

Page 16

August 19, 2011

R

7068-112

1.  Metallic noise.

1.  Noise is caused by metal expanding and contracting as

it heats up and cools down, similar to the sound pro-

duced by a furnace or heating duct. This noise does not

affect the operation or longevity of your appliance.

2.  White ash buildup on glass.

2.  This is normal. Clean the glass using any non-abrasive

glass cleaner.

3.  Glass has buildup of black soot

3.  Excessive build-up of ash. See solution #4. The lower

burn settings will produce more ash, the higher burn

settings produce less. The more it burns on low the

more frequent cleaning of the glass is required.

4.  Glass has turned dirty.

3.  Excessive build up of ash. The lower burn settings will

produce more ash, the higher burn settings produce

less. The more it burns on low the more frequent clean-

ing of the glass is required.

5.  Fire has tall flames with black tails and is lazy.

4.  The feed rate needs to be reduced or the firepot needs

cleaning. Heat exchanger or exhaust blower needs

cleaning.

6.  Smokey start-up or puffs of smoke from the airwash. 5.  Either the firepot is dirty or there is too much fuel at

start-up and not enough air. Close down feed rate 1/4

(6mm) inch at a time until this no longer happens.

6.  Large flame at start-up.

6.  This is normal. Flame will settle down once the fire is

established.