North Star M1108D Manuel D’Utilisation

45 

 

 Raise beam to vertical position as 

described in the SPLITTING 
OPERATION section of the manual 

 Slightly loosen Hose Clamp on to 

the loose end of the Return line 

 Slide the loose end of the Return 

Line onto the Return Line Fitting 

 Tighten Hose Clamp  

 

 Install loose end of Hydraulic Hose 

into the Swivel Fitting as shown 
and tighten the fitting connection to 
47 lb-ft 

(No hydraulic sealant required) 

 Fill log splitter with hydraulic fluid 

as outlined in the Initial Unpacking 
& Set-Up section of the manual. 

 Fill engine with SAE 10W-30 as 

recommended by the engine 
manufacturer 

 

Swivel 
Fitting 

Hydraulic 
Hose 

Fig 02428

Return Line

Return Line

Fitting 

Fig 02429

Hose 
Clamp