NorthStar Navigation EXPLORER 657 Manuel D’Utilisation

29

Northstar Explorer 657 Installation and Operation Manual

iv Press 

.

3   To move a waypoint in the route:

i 

Move the cursor to the waypoint to 
move.

ii Press 

 and select Move.

iii  Move the cursor to where the waypoint 

will be.

iv Press 

.

4   To remove a waypoint from the route:

i 

Move the cursor to the waypoint to 
remove from the route.

ii Press 

 and select Remove. The 

waypoint is removed from the route, but 
the waypoint is not deleted.

5   To start navigating the route

i Press 

 and select Start

6   To end creating the route 

i Press 

 and select End

7   To delete the route

i Press 

 and select Delete

 

ii   Select yes to confirm.

 Tip: The distance and bearing calculator can 

also be used to enter a course and save it as a 
route (see section 3-3).

1 

In the routes window, press 

 and 

select Create.

2 

A new route, with a default name and no 
waypoints, is displayed.

3 

To change the route name:

i 

Select the route name at the top of the 
display and press 

.

ii 

Change the name if necessary. 

iii Press 

.

4 

To insert a waypoint in the route:

i 

Select where the waypoint will be:

 

 

To insert the first waypoint in a new  

 

route, select Leg 1.

 

 

To insert a waypoint at the end of  

 

the route, select the unused leg at  

 

the end of the list of waypoints.

 

 

Otherwise, select the waypoint to  

 

insert the new waypoint in front of.

ii Press 

. A list of waypoints is 

displayed. Select the waypoint to use. 

 

As waypoints are inserted, the distance and 
bearing of each leg is shown automatically. If 
the route has more waypoints than will fit on 

the display, press 

 or 

 to see them.

5 

To remove a waypoint from the route:

i 

Select the waypoint to remove.

ii Press 

 and select Remove.

6 

Repeat this process until the route is finished. 

7 Press 

.

8 

Display the route on the chart (see section 
6-2-3) and check that the route does not cross 
land or dangerous water. 

1 

In the routes window, select the route to edit. 
Press 

 and select Edit on chart.

2 

The selected route is displayed on the chart, 
with a circle around the first waypoint. 

3 

Edit the route as described in section 6-2-1 A, 
starting at step 4.

1 

In the routes window, press 

 or 

 to 

highlight the route to edit. Press 

 and 

select Edit.

2 

The selected route is displayed: the route 
name and a list of the waypoints.

3 

Edit the route as described in section 6-2-1 B, 
starting at step 3.

To view the selected route at the center of the 
display:

1 

In the routes window, press 

 or 

 to 

highlight the route to display. Press 

 

and select Display.

 

Or, in the Chart window, press 

, select 

Find, then select Route. Select a route 
from the list.

2 

The 657 displays the selected route on the 
chart.