Northern UTA220/UTA220k Manuel D’Utilisation
2-2
UTA220/UTA220k
Installation
INSTALLATION
A typical installation is shown in Figure 2-1.
Figure 2-1. Typical Installation
Power Connection
Insert the power plug into a grounded 115 or 220 VAC outlet
as required for the specific model. The UTA220 is now ready
to be turned on and programmed.
as required for the specific model. The UTA220 is now ready
to be turned on and programmed.
Caution: Do not connect the UTA220 to the ISDN line until
the UTA220 has been programmed with the correct switch
settings. Refer to Central Office Switch in Chapter 3 for details.
the UTA220 has been programmed with the correct switch
settings. Refer to Central Office Switch in Chapter 3 for details.
ISDN Connection
To connect the UTA220 to the ISDN line, insert one end of the
supplied cable into the UTA220 ISDN U jack. Insert the other
end into the ISDN (RJ45) jack.
supplied cable into the UTA220 ISDN U jack. Insert the other
end into the ISDN (RJ45) jack.
Note: An NT1 device is not required.