Night & Day Evening Table Instructions De Montage
Assembly Procedure
1
Assembly
Instructions
EVENING TABLE
End Table
Coffee Table
Assembled view
Parts in this box
2
3
Page 1 of 2
Check that all holes are free of
wood chips and sawdust.
wood chips and sawdust.
Helpful Tips: Fastening of Bolts
A screwdriver will help in aligning
the Barrel Nut hole with the Bolt.
the Barrel Nut hole with the Bolt.
Screw the Bolt in gently to avoid
stripping the threads.
stripping the threads.
FUTON ACCESSORIES
This instruction shows
Coffee Table assembly.
Procedure is the same
for both sizes.
N&D-0301
1.
2.
3.
Turn the Table Top upside down as shown on diagram.
Be sure that the Table Top is laying on a flat smooth surface.
Attach the Leg Frames to the Apron using the Bolts and
Barrel nuts as shown below. - LEAVE BOLTS VERY LOOSE!
Be sure that the Table Top is laying on a flat smooth surface.
Attach the Leg Frames to the Apron using the Bolts and
Barrel nuts as shown below. - LEAVE BOLTS VERY LOOSE!
When all parts are assembled, gently tighten all the Bolts.
Leg Frame Assembly
x 2 Pieces
Table Top (Apron attached)
x 1 Piece
Wood Bracket
x 4 Pieces
x 4 Pieces
Magazine Shelf
x 1 Piece
Stretcher x 2 Pieces
Allen Key
x 1 Piece
x 1 Piece
Barrel Nuts
x 4 Pieces
x 4 Pieces
Hardware in this box:
80mm Bolts x 4 Pieces
60mm Bolts x 8 Pieces
Wood Button
x 4 Pieces
x 4 Pieces
Shelf Support
Coffee: x 8 Pcs
End: x 4 Pcs
Coffee: x 8 Pcs
End: x 4 Pcs
Wood Dowel
Barrel Nut
Table Top
Table Apron
60mm
Bolts
Bolts
80mm
Bolts
Bolts
Stretcher
Leg Frame
Barrel Nut
60mm
Bolts
80mm
Bolts
Leg Frame
Wood Dowel