Nexus 21 Stereo Receiver Multi Control Manuel D’Utilisation
MULTI CONTROL
18
In edit mode it increases to th
4.2.4 SET
A press on SET unlocks
When unlocked, the digits are ”active” (flashes) and can be edited
by pressing MINUS, PL
When finished editing, l
When unlocked, the digits are ”active” (flashes) and can be edited
by pressing MINUS, PL
When finished editing, l
4.2.5
Clear / cancel / reset
A press on CLEAR, c
counters.
counters.
4.2.6 Calibrati
To access calibration m
seconds.
To return to main-function mode, press SET when the text return
(RET) is shown.
seconds.
To return to main-function mode, press SET when the text return
(RET) is shown.
4.2.7 Lighting
The instrument uses red back lighting for the display and the 4
push-buttons. The lighting can be set at 4 different levels.
To quick access the light control, press and hold PAGE for more
than 2 seconds. The flashing text (Lit OFF) will be displayed and
the display will be lit momentarily.
To select between the 4 light levels, Press PLUS: LOW, MED,
MAX and OFF. To lock the selected level press SET.
The selected light level will be copied to all NX2 instruments
connected to the system. When the lighting is on, it is not possible
to reduce or turn off the lighting on an individual instrument.
push-buttons. The lighting can be set at 4 different levels.
To quick access the light control, press and hold PAGE for more
than 2 seconds. The flashing text (Lit OFF) will be displayed and
the display will be lit momentarily.
To select between the 4 light levels, Press PLUS: LOW, MED,
MAX and OFF. To lock the selected level press SET.
The selected light level will be copied to all NX2 instruments
connected to the system. When the lighting is on, it is not possible
to reduce or turn off the lighting on an individual instrument.
e next digit.
a digit to access edit mode.
US and PAGE as required.
ock the digit by another press on SET.
lear digits, cancel alarms or resets the
on
ode, press and hold SET more than 2
2 sec
2 sec