Nexus 21 Stereo Receiver Multi Control Manuel D’Utilisation

 

MULTI CONTROL 

 

 

 
General information  
Alarm on = minute sign
the sub-function.   
 
Alarm off = no minute si
 
The alarms will be trigge
actual depth becomes le
alarm), or more (depth a
the set depth value. 
 
The alarm is audible (signal) and visual (main and sub-function 
flashes). 
 
When a triggered alarm
again if the selected dep
 
If a different page tha
triggered, the set alar
flashing, until you silence or turn off the alarm. The instrument will 
then automatically retur
 
Loss of signal. If there are no 
display indicates 3 dotte

Depth from the water su
setting (See 12.2.3, C22).  
Unit available in meters (m), feet (FT) or fathoms (FA). 
(See 12.2.2, C21).  
 

The instrument uses red back lighting for the display and the 5 
push-buttons. The lighting can be set at 4 different levels.   
 
To change light level, press SET, The flashing text (Lit OFF) will 
be displayed and the display will be lit momentarily.  
 
To select between the 4 light levels, Press PLUS: LOW, MID, 
MAX and OFF.  To lock the selected level press SET.  
 
The selected light level will be copied to all NX2 instruments 
connected to the system. When the lighting is on, it is not possible 
to reduce or turn off the lighting on an individual instrument. 

 ( ´ ) displayed above the last depth digit in 

gn ( ´ ) displayed. 

red, if the 
ss (shallow 

larm), than 

 has been silenced, it will only be triggered 

th value differs by +/-2m (6 ft)  

n DEPTH is shown when the alarm is 

m function will automatically be shown 

n to the previous page. 

depth echoes for 3 seconds, the 

d lines ( --- ) until a new echo is received.   

rface or the keel depending on calibration 

 

22