New Transducers TR-5001 Manuel D’Utilisation

4. MONITORS: Multiple Monitors, Split 

Monitor

To configure the mapping relationship 

between the monitors and the touch panels, 

select the monitor page as below.

Use the +10% and -10% button to adjust. If you press the +10% button, the top, bottom, left 

and right edges will extend 10%, and the cursor will be moved 10 pixels from the X and Y Axis 

to the right and top. If you press the -10% button, the top, bottom, left and right edges will 

contract 10%, and cursor will be moved 10 pixels from the X and Y Axis to the left and bottom.

Choose the Default button to restore the default settings.

In some cases, the cursor will be behind the finger when you touch the panel. If you cannot see 

the cursor, you can set the X Axis or Y Axis to move the cursor.

If you set the Offset X Axis to <Smaller>, cursor will be moved one pixel to the left of 

the X Axis. If you set the Offset X Axis to <Larger>, cursor will be moved one pixel to 

the right of the X Axis.

If you set the Offset Y Axis to <Smaller>, cursor will be moved one pixel above the Y 

Axis. If you set the Offset Y Axis to <Larger>, cursor will be moved one pixel below 

the Y Axis.