New Transducers TR-5001 Manuel D’Utilisation

 
IDE HDD Block Mode 
If your IDE hard drive supports block mode select Enabled for 

automatic detection of the optimal number of block read/writes per 

sector the drive can support 

The choice: Enabled, Disabled. 
 
IDE DMA transfer acess 
 

The choice: Enabled, Disabled. 
 
On-Chip Primary PCI IDE  
The chipset contains a PCI IDE interface with support for two IDE 

channels. Select Enabled to activate the primary IDE interface.  Select 

Disabled to deactivate this interface 

The choice: Enabled, Disabled. 

 

On-Chip Secondary PCI IDE 
The chipset contains a PCI IDE interface with support for two IDE 

channels. Select Enabled to activate the secondary IDE interface.  

Select Disabled to deactivate this interface 

The choice: Enabled, Disabled. 

IDE Primary/Secondary Master/Slave PIO 
The four IDE PIO (Programmed Input/Output) fields let you set a PIO 

mode (0-4) for each of the four IDE devices that the onboard IDE 

interface supports. Modes 0 through 4 provide successively increased 

performance. In Auto mode, the system automatically determines the 

best mode for each device. 

The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.