New Transducers TR-5001 Manuel D’Utilisation

 

Supervisor/User Password Setting 

 
You can set either supervisor or user password, or both of then.  The 

differences between are: 
supervisor password : can enter and change the options of the setup 

menus. 

 

user password      : just can only enter but do not have the right to 

change the options of the setup menus. When you select this function, 

the following message will appear at the center of the screen to assist 

you in creating a password. 

 

 

 

Type the password, up to eight characters in length, and press <Enter>.  

The password typed now will clear any previously entered password 

from CMOS memory.  You will be asked to confirm the password.  

Type the password again and press <Enter>.  You may also press 

<Esc> to abort the selection and not enter a password. 

To disable a password, just press <Enter> when you are prompted to 

enter the password.  A message will confirm the password will be 

disabled.  Once the password is disabled, the system will boot and you 

can enter Setup freely. 

 

 

When a password has been enabled, you will be prompted to enter it 

every time you try to enter Setup. This prevents an unauthorized person 

from changing any part of your system configuration. 

Additionally, when a password is enabled, you can also require the 

BIOS to request a password every time your system is rebooted.  This 

would prevent unauthorized use of your computer.   

You determine when the password is required within the BIOS 

Features Setup Menu and its Security option.  If the Security option is 

set to “System”, the password will be required both at boot and at entry 

to Setup. If set to “Setup”, prompting only occurs when trying to enter 

Setup.