Navman 4432 Manuel D’Utilisation

Page de 37
Shadows
Shadows are created around areas where the ultrasonic beam cannot ‘see’. These areas include 
hollows on the bottom or beside rocks and ledges, where the strong echoes returned off the rocks 
obscure the weak echoes of the fish and may also create a double bottom trace. See following for 
an example of the sonar display in such an environment. A double bottom trace is shown on the 
display.
When looking for fish with the wide angled 83 kHz frequency, be aware of increased shadows. Use 
the high frequency 200 kHz in areas that have rocks and ledges because this frequency reduces the 
shadow effect considerably.
The differences in the cone width affect what is displayed. See section 4-2 Single and Dual Frequency fishfinding.
Frequency and cone width
The pulse generated by the FISH 4432/4433 
transducer travels down through the water, 
spreading outwards to form a rough cone shape. 
However, the cone width is dependent upon 
the frequency of the pulse; at 83 kHz it is 20°, 
whereas at 200 kHz it is 14°. The chart shows 
how the cone width varies over depth for each 
frequency used. Figures are approximate.
  Water  
Cone width  
Cone width
  Depth  
at 83 kHz 
at 200 kHz
 10 
 
2
 20 
5
 30 
11 
7
 40 
15 
10
 50 
18 
12
 60 
22 
15
 70 
25 
17
 80 
29 
20
 90 
33 
22
 100 
36 
25
 150 
55 
37
 200 
73 
50
 300 
109 
75
 400 
146 
100
 500 
182 
125
 600 
218 
149
 700 
255 
174
 800 
291 
199
 900 
328 
224
 1000 
364 
249
Depth 
83 kHz 
200 kHz
20°
14°
50
100
150
200
250
0
18
30
55
73
91
12
25
37
50
62
Sonar display of same area
Fish is visible on the display
Fish is hidden by the strong echoes off the 
bottom and is not shown on the display
Example of shadows
Fish is visible on the display
FISH 4432/4433 Installation and Operation Manual
18
NAVMAN