NEC EXPRESS 5800 Manuel D’Utilisation

Express Setup can install the Windows 2000 operating system.  However, note the following
issue:

!

 

Before starting the installation, complete the addition of optional
boards and settings of required BIOS values.

!

 

Use this User's Guide when installing Windows 2000 on this server
system. Do not use the installation guide for installing Windows
2000 that may be packaged with other software not supplied with this
system.

!

 

After completing Express Setup, see "Setup for Problem Resolution"
described later to configure your system to facilitate problem
resolution and recovery.

Installing on the Mirrored Volume

If you want to install Windows 2000 on a volume that has been mirrored using "Disk
Management", you must invalidate the mirror before re-installing the system on a basic disk, and
reconfigure the mirror after the installation has completed.
Management of a mirror volume can be performed from "Disk Management" under "Computer
Management".

Connecting Magnetic Optical (MO) Device

If you are installing Windows 2000 with a MO device connected to the system, the installation
may not be completed correctly.  In this case, remove the MO device and then reinstall the
system.

Connecting Hard Disk Drive

The hard disk drive that is to contain the OS can only be connected to a different SCSI controller
after the OS is installed on it.