NEC EXPRESS 5800 Manuel D’Utilisation
System Overview 1-9
STATUS INDICATORS
This section describes the server status indicators.
POWER Lamp (
)
The POWER lamp is lit (green) while the server power is on. It is off when no power is being
supplied to the server.
supplied to the server.
NOTE:
This server does not support power saving mode.
STATUS Lamp (
)
The STATUS lamp is lit (green) while the server is operating normally. (There is a STATUS
lamp located on both the front and rear panels of the server.) If the STATUS lamp is off or turns
amber color and flashes, it indicates that the server is in an abnormal state.
The table below lists and describes the STATUS lamp indications and any actions to be taken.
lamp located on both the front and rear panels of the server.) If the STATUS lamp is off or turns
amber color and flashes, it indicates that the server is in an abnormal state.
The table below lists and describes the STATUS lamp indications and any actions to be taken.
NOTES:
!
If ESMPRO or the offline maintenance utility is installed, you can
determine the cause of a failure by referring to the error log.
determine the cause of a failure by referring to the error log.
!
The system can be restarted automatically. However, if the automatic
restart cannot be performed for any reason, then the system must be
shutdown manually by turning the power off and back on.
restart cannot be performed for any reason, then the system must be
shutdown manually by turning the power off and back on.