NEC EXPRESS 5800 Manuel D’Utilisation
2-12 Setting Up Your System
Installing the Server
1.
Pull out the sliding rails of the right and left rail assemblies until they are locked.
2.
At least two persons are required to install the server. Securely the server with its front
side facing toward you.
side facing toward you.
3.
Firmly fit the inner rails on the sides of the server into the rail assemblies, and then
slowly push the server into the rack.
The server is locked on its way into the rack.
slowly push the server into the rack.
The server is locked on its way into the rack.
4.
Push the server in while pressing the release levers on the right and left sides of the
server.
server.
NOTE:
When the server is installed for the first time, the mechanical parts
are rather hard to slide. You may feel strong friction when pushing in the
server. In this case, strongly push it in.
server. In this case, strongly push it in.
Inner rail
Slide rail
Release lever