NEC EXPRESS 5800 Manuel D’Utilisation

The following describes examples of configuration required to use software-link features or for
system operations.

To display system date or time

Select [Main] - [System Time], [System Date].

To link with temperature monitoring feature of ESMPRO

Select [Server] - [Temperature Sensor] - [Enabled].

To control power supply of the server with ESMPRO Manager via the network

Select [Advanced] - [Advanced Chipset Control] - [Wake On Lan] - [Enabled].

To link power supply with the UPS

!

 

To power on the server when power is supply from the UPS

Select [Server] - [After Power Failure] - [Power On].

!

 

To keep the server off-powered even when power is supplied from the UPS if the
POWER switch was used to power off

Select [Server] - [After Power Failure] - [Last State].

!

 

To keep the server off-powered even when power is supplied from the UPS

Select [Server] - [After Power Failure] - [StayOff].