KVH Industries FB250 Manuel D’Utilisation

Chapter 3:  Operating the system

Using a phone or fax machine

41

33333

O

p

era

ti

n

g t

h

e 

sy

st

em

3.1 kHz Audio and Standard Voice have separate phone numbers. This way, a 
person calling a phone connected to the terminal can select whether to use 
3.1 kHz Audio or Standard Voice, simply by using the dedicated phone 
number.

If the mobile numbers are listed in the web interface, you can look them up as 
follows:

Connect a computer, access the web interface and select PHONE BOOK > 
Mobile numbers. For further information, see Viewing and editing the mobile 
numbers on page 75.

If the mobile numbers are not available in the web interface, refer to your 
airtime subscription.

For information on how to make a call to the terminal, see Making a call to the 
terminal on page 44.

To select which call types are accepted for an incoming call, use a computer 
and the web interface.

•

ISDN. Select the call type under SETTINGS > ISDN. 
For further information, see Configuring the ISDN interface on page 92.

•

Phone/Fax. Select the call type for each port under SETTINGS > Phone/Fax. 
For further information, see Configuring the Phone/Fax interface on 
page 90.

•

IP handset. Select the call type for each handset in the web interface under 
SETTINGS > IP Handset > Call settings. For further information, see Setting 
the call types for IP handsets on page 108.

The call type you are using must be selected in the web interface 
(refer to the next section).

There are two Voice numbers, one for 3.1 kHz Audio and one for 
Standard Voice.

BGAN-X_UM.book  Page 41  Wednesday, April 30, 2008  12:48 PM