Kenwood MGR-E8 Manuel D’Utilisation

MGR-E8

In the case of a trouble such as the impossibility of switching this unit ON, spontaneous 

power shutdown or erroneous display, press the Reset button (page 8). 

For details, refer to the support information in our website by visiting:

Symptom

Remedy

Power cannot be switched ON or 
pressing a button does not start an 
operation.

The hold function is set to “ALL.” 
Cancel the HOLD function with the HOLD switch on this unit 
(page 19).

The battery is nearly exhausted. 
Recharge it if it is rechargeable or replace it if it is an alkaline 
battery.  (page 17)

This unit is being connected to the PC. 
This unit is inoperable when it is connected to the PC in the 
storage mode.

The remaining battery power drops 
soon after recharging.

The rechargeable battery is degraded. 
Replace it with a brand-new rechargeable battery.
For the battery replacement, contact your nearest Kenwood 
service agent.

Audio is not heard.

Headphones are connected improperly. 
Connect headphones correctly to this unit.

Battery cannot be recharged.

USB cable is connected improperly. 
Check the connections on both this unit and PC sides.

The ambient temperature is outside the operating temperature 
range. 
The battery should be recharged within the operating 
temperature range. (page 76)

PC does not recognize this unit.

USB cable is defective. 
Purchase and use another USB cable.

This unit is connected to the PC improperly. 
Check the connection between this unit and PC.

B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd   80

B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd   80

10/08/04   13:49

10/08/04   13:49