Kanguru Solutions iNAS-100 Manuel D’Utilisation

Connecting the iNAS as a Router. 

WAN Configuration 

Enter the Network Settings sections from the Administration page. Then click 
on WAN Configuration on the menu to the left if you are not there already. 
 

 

5.  Select the Network protocol that your ISP provides. You may need to 

check with your ISP to confirm your type of connection.  If you use a 
Static IP address then you need to get this IP from your ISP.  

 

6.  Enable the “Allow Entering Administration Web Pages from External 

Network” if you plan to access the iNAS remotely.  Port 80 is selected by 
default, and is already open to most web browsers to use the HTTP 
protocol. Kanguru strongly suggests that you check with your ISP to 
confirm that the selected port is open.   

 
Note1: If you select a port other than 80, you will need to enter this 
number at the end of the iNAS IP address. For example, if you choose to 
use Port 88 to remotely access the iNAS, then you should enter 

 
Note2: If your ISP provides you with a Dynamic IP address, then should use 
a DNS service such as 

your router.  The DNS service is free, and will automatically update your IP 
address for you.  This is very useful because your Dynamic IP address can 
change at any moment, so you will never be sure of the WAN IP address of 
the iNAS if you are trying to remotely connect.  The DNS service updates 
the Dynamic IP address and masks it with a domain name of your choosing.  
 
7. Click Apply to enter these settings. 

 

 

 

 

19