Kanguru Solutions iNAS-100 Manuel D’Utilisation

 

System Tools 

The following system tools allow optimized maintenance or management of your 
Kanguru iNAS 100: 

•  SNMP Settings 

In order to use Simple Network Management Protocol (SNMP) to manage the 
Kanguru iNAS 100 's network components, the SNMP service must be started. 

•  Alert Notification 

Configures administrator’s e-mail address and SMTP server’s IP address.  In 
case of warning or malfunction, an email is automatically sent to the 
administrator. 

•  Restart / Shutdown 

Powers off or restarts the Kanguru iNAS 100. 

•  Hardware Settings 

You can enable or disable the following hardware functions of your Kanguru 
iNAS 100: 

Allows you to change the TCP/IP configuration using the LCD panel buttons. 

Depress and hold the configuration-reset switch for 5 seconds to reset the 
administrator password and network settings to the factory default. 

 Hard disk will go to standby mode if there is no access within the period you 
specify. 

If the buzzer is disabled, it will not sound when a system error occurs, but the 
warning light will still shine. 

•  System Update 

Performs system software updates. Make sure that the image file that you are 
about to update is the correct version and read through the instructions carefully.  
It is wise to back up all existing data on the Kanguru iNAS 100 prior to performing 
system software update. The current settings will remain unchanged after the 
system is upgraded. 

•  Change Logo 

You can place a picture that you desire on the upper right corner of the home 
page. The size of the picture cannot exceed 20K. 

 

 

32