Juniper Networks fi-6000NS Manuel D’Utilisation
xxvi
Protect the scanner from static electricity.
Do not use aerosol sprays near the scanner.
Avoid any contact when scanner is in use.
Disconnect the power plug from the power outlet when the scanner is not
used for a long period of time.
used for a long period of time.
Do not install the scanner in direct sunlight.
Before moving the scanner, make sure the shipping lock is locked.
Install the scanner away from strong magnetic fields and other sources of electronic
noise. Also, protect the scanner against any static electricity, which can cause the
scanner to malfunction.
noise. Also, protect the scanner against any static electricity, which can cause the
scanner to malfunction.
Do not use aerosol sprays to clean the scanner. Aerosol sprays can blow dirt and dust
inside the scanner, resulting in scanner failure or malfunction.
inside the scanner, resulting in scanner failure or malfunction.
Avoid touching any scanner mechanism during scanning since this may cause injuries.
When the scanner is not going to be used for a long period of time, be sure to
disconnect the power plug from the power outlet.
disconnect the power plug from the power outlet.
Do not install the scanner under direct sunlight or near heating apparatus. Doing so
might cause excessive heat to build up inside the scanner, which can cause scanner
trouble or even fire. Install the scanner in a well-ventilated location.
might cause excessive heat to build up inside the scanner, which can cause scanner
trouble or even fire. Install the scanner in a well-ventilated location.
When moving the scanner, be sure to lock the shipping lock in order to prevent
damages to the scanner.
damages to the scanner.