JVC KW-NT800HDT Manuel D'Instructions
ENGLISH
109
1
Press
.
2
3
Menu items
Selectable settings
Initial: Underlined
Phone Connection
Connect:
☞ page 102
Disconnect:
☞ page 102
Audio Connection
Connect:
☞ page 108
Disconnect:
☞ page 108
PIN Code
Displays the PIN code of the unit.
• To change the PIN code, press [Change], enter a new PIN code, then press [OK].
• To change the PIN code, press [Change], enter a new PIN code, then press [OK].
(
☞ page 102)
Device Name
Shows the device name (JVC Navi) to be shown on the Bluetooth device.
Device Address
Shows the MAC address of the unit.
BT Audio
On: Select when playing the Bluetooth audio device using “BT Audio” as the source.
Off: Select when playing back iPod/iPhone using “iPod” as the source.
Off: Select when playing back iPod/iPhone using “iPod” as the source.
Auto Connect
On: The connection is automatically established with the last connected Bluetooth
device when the unit is turned on.
Off: Cancels.
Auto Answer
On: The unit answers the incoming calls automatically.
Off: The unit does not answer the calls automatically. Answer the calls manually.
Off: The unit does not answer the calls automatically. Answer the calls manually.
Bluetooth device settings
EN_KW-NT800HDT_NT700[J].indb 109
EN_KW-NT800HDT_NT700[J].indb 109
1/27/2012 4:40:15 PM
1/27/2012 4:40:15 PM