JVC KW-NT800HDT Manuel D'Instructions
ENGLISH
12
Installation settings
When you turn on the unit for the first time, the initial
setup screen appears.
setup screen appears.
1
Turn on the ignition switch.
The power of the unit is turned on.
2
Select the language you want for the display
and the voice guidance.
• You can also select the system language through
<Settings> - <System> - <Region> -
<Language>. (
<Language>. (
☞ page 84)
3
Set the installation settings (1), then press
[OK] (2).
State/
Province
Province
Select the State or Province where
you are now.
you are now.
Time Zone *
Select your residential area for
automatic clock adjustment by
GPS signal.
automatic clock adjustment by
GPS signal.
DST *
Select [Auto] if your residential
area is subject to Daylight Saving
Time.
area is subject to Daylight Saving
Time.
Camera
Input *
Input *
Select [On] when connecting the
rear view camera to the CAMERA
IN jack.
rear view camera to the CAMERA
IN jack.
* You can also change these settings through
<Settings> - <System>. (
☞ page 85, 86)
EN_KW-NT800HDT_NT700[J].indb 12
EN_KW-NT800HDT_NT700[J].indb 12
1/27/2012 4:39:58 PM
1/27/2012 4:39:58 PM