JVC KW-NT800HDT Manuel D'Instructions
39
ENGLISH
Checking the information of the navigation system
• If the rear view screen is displayed when shifting
the gear to the reverse (R) position, the reverse
gear signal is detected (<On>).
gear signal is detected (<On>).
w Information service being received
(Traffic or Area information; only for KW-NT800HDT)
*
1
About calibration
The calibration is a function conducted in order to
display the current position more accurately using
signals from GPS and the internal sensors.
display the current position more accurately using
signals from GPS and the internal sensors.
Even after calibration status changed to
<Learned>, the system will keep learning to make
the current position more accurate.
<Learned>, the system will keep learning to make
the current position more accurate.
• The calibration does not function without the
connection of GPS antenna and the speed signal
lead. For the connection,
lead. For the connection,
☞ Installation/Connection
Manual (separate volume).
• Driving under various conditions completes the
calibration faster. If <Learning> remains on the
screen for a long period, check the connection of the
GPS antenna and the speed signal lead.
screen for a long period, check the connection of the
GPS antenna and the speed signal lead.
• While learning is going on, the current position may
not be displayed correctly .
1 Version of the software
2 Version of the map database
3 Serial number
4 Speed pulse rate
5 GPS antenna connection status
2 Version of the map database
3 Serial number
4 Speed pulse rate
5 GPS antenna connection status
<OK>: GPS antenna is detected (the figure
shows the number of GPS satellites being
received).
received).
<NG>: GPS antenna is not detected
6 Status of the gyroscope
7 Status of calibration *
7 Status of calibration *
1
<Learning>: The system has started learning
calibration data.
<Learned>: Though learning is almost complete,
the system is still learning to make the calibration
data more accurate.
calibration data.
<Learned>: Though learning is almost complete,
the system is still learning to make the calibration
data more accurate.
8 Resets the calibration data.
Reset the data if you replace the tires or if the
current position is displayed far from the actual
position
current position is displayed far from the actual
position
9 Connection status of the illumination control lead
<On>: The illumination signal is detected.
p Connection status of the parking brake lead
<On>: The parking brake is engaged.
q Connection status of the reverse gear signal lead
<On>: Reverse gear signal is detected.
System Info
1
Press
- <Settings>.
2
1
2
3
2
3
Sensor Status
1
Press
- <Settings>.
2
9
4
5
6
7
5
6
7
p
q
q
8
w
EN_KW-NT800HDT_NT700[J].indb 39
EN_KW-NT800HDT_NT700[J].indb 39
1/27/2012 4:40:03 PM
1/27/2012 4:40:03 PM