JVC KW-NT800HDT Manuel D'Instructions
54
ENGLISH
To insert a disc
1
Open the monitor panel.
2
Insert a disc.
Label side
The source changes to “DISC” and playback starts.
Disc operations
• If a disc does not have any disc menu, all tracks on it
will be played repeatedly until you change the source
or eject the disc.
or eject the disc.
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
Caution on volume setting:
When playing back a multi-channel encoded disc,
the multi-channel signals are downmixed.
the multi-channel signals are downmixed.
If “
” appears on the screen, the unit cannot
accept the operation you have tried to do.
• In some cases, without showing “
• In some cases, without showing “
”,
operations will not be accepted.
To eject a disc
1
Open the monitor panel.
• You can eject a disc when playing another AV source.
• If the ejected disc is not removed within 15 seconds,
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
loading slot to protect it from dust.
• If the disc cannot be ejected,
☞ page 5.
EN_KW-NT800HDT_NT700[J].indb 54
EN_KW-NT800HDT_NT700[J].indb 54
1/27/2012 4:40:06 PM
1/27/2012 4:40:06 PM