JVC KW-NT800HDT Manuel D'Instructions
Signal Reception indicator
Channel name
Band
Preset number
The text information
currently received
currently received
Category name
Channel number
ENGLISH
77
1
Select “SiriusXM” as the source.
SiriusXM Tuner starts updating all the SiriusXM channels.
2
Check your Radio ID.
Radio ID is labeled on the casing of the SiriusXM Tuner or the bottom of the SiriusXM Tuner unit.
• You can also display the Radio ID on the screen by tuning in to Channel 0.
• You can also display the Radio ID on the screen by tuning in to Channel 0.
– To hide the ID display, select any channel other than “0”.
3
Contact SiriusXM on the internet at www.siriusxm.com/activatenow and enter the
required information, or call 1-866-635-2349.
Once activated, the unit can then be tuned to one of the available channels.
Listening to the SiriusXM Radio
Before operating, connect the SiriusXM tuner (not supplied) to the expansion port on the rear of the unit.
(
(
☞ Installation/Connection Manual)
Activating subscription
[Band]
Selects the band.
SXM1
SXM2
SXM3
[
4] [¢] Press: Selects a channel.
Hold: Changes the channel rapidly.
– While searching, invalid and
– While searching, invalid and
unsubscribed channels are
skipped.
skipped.
[ ] [ ]
Selects a preset channel.
[List]
Displays the Category/Channel List.
[
]
Selects a channel directly.
[
]
Switches between preset list screen
and tuner source screen.
and tuner source screen.
[Mode]
Changes the settings of the reception
restrictions.
restrictions.
EN_KW-NT800HDT_NT700[J].indb 77
EN_KW-NT800HDT_NT700[J].indb 77
1/27/2012 4:40:09 PM
1/27/2012 4:40:09 PM