Japan Tiger 7100e+ Manuel D’Utilisation
User Manual
139
English
Using JetAdmin
Some JetAdmin functions are supported.
• Under [Operating Mode], either [Queue Server Mode] or
[Remote Printer Mode] can be selected.
• In [Remote Printer Mode] the Print Server, (Only if its name
has 30 characters or less) and Printer number details have to
be added.
be added.
• Under [Queues] section, you can register bindery mode
queues. (This can be done only if the print server name has
30 characters or less).
30 characters or less).
• Pressing [Next] takes you to [TCP/IP] screen where automatic
[DHCP], [BOOTP] or [Manual TCP/IP Setting] can be
selected. If manual IP setting is selected then IP Address,
Subnet Mask, Default Gateway and idle timeout settings
must be configured.
selected. If manual IP setting is selected then IP Address,
Subnet Mask, Default Gateway and idle timeout settings
must be configured.
• Go to [Option] – [AppleTalk] to alter [Apple Talk Name].
• The following items can be configured in [Properties] in
the [Device] menu. Select the [Device] tab to view printer
status. In the [JetDirect] tab, go to [Reset JetDirect Card] to
reinitialise or reset card back to default settings. Select
[Frame Type] to match what frame type your network uses.
Select [Protocol Stack] to select [Windows/NT, HPUX,
SunOS] or [EtherTalk]. Select [Time Interval] to set [Queue
Polling Rate].
status. In the [JetDirect] tab, go to [Reset JetDirect Card] to
reinitialise or reset card back to default settings. Select
[Frame Type] to match what frame type your network uses.
Select [Protocol Stack] to select [Windows/NT, HPUX,
SunOS] or [EtherTalk]. Select [Time Interval] to set [Queue
Polling Rate].
Functions supported by JetAdmin
• On the main screen, the printer name will be listed under
[Name], the Ethernet address under [Hardware Address], and
the IP Address under [TCP/IP Address].
the IP Address under [TCP/IP Address].
• In an environment from which the NetWare server can be
logged in to, select [New] from the [Device] menu to acquire
the Ethernet board as a new device.
the Ethernet board as a new device.
• The following items can be configured in [Modify] in the
[Device] menu.
• In [Device Information] you can set [Print Server Name]
and [Description].
• Pressing [Next] takes you to the NetWare screen where the
NDS tree and context information can be added.
7100e+.p65
25/08/99, 20:55 PM
139