Ninja BL770 Manuel D’Utilisation

 IMPORTANT: Make sure that the motor base 

is plugged in for use.

1  Place the motor base on a clean, dry, level 

surface such as a counter or table top. 

2  Align and lower the Pitcher onto the motor 

base. (Fig. 1) Handle should be aligned slightly 

to the right of the “LOCK” symbol on the 

motor base.

3  Rotate the pitcher clockwise as far as it will go 

to lock in place. (Fig. 2) 

4  The pitcher can be placed on the motor base 

two ways; the handle can be on the front right 

corner or the front left corner.  

(Fig. 3a, Fig. 3b)

5  Holding the 6-Blade Assembly by the top of the 

shaft, place it onto the drive gear inside the 

pitcher. Ensure that the attachment is seated 

properly and is standing upright. (Fig. 4)  

NOTE: The blade will fit loosely on the drive 

gear.

6  Add the ingredients to the pitcher, making sure 

that they do not exceed the highest measured 

marking line on the side of the pitcher.  

NOTE: If you need to add additional ingredients 

while the appliance is processing, open the 

pour spout cap and pour the ingredients in 

through the opening.

7  Plug the power cord into the electrical outlet 

and press the power button ( ).  

8  Holding the lid by the handle in the upright 

position, place it on top of the pitcher aligning 

the arrow ( ) located on the lid with the arrow 

( ) located on the pitcher’s handle. (Fig. 5) 

Press the handle down until you hear a click.

BL770_series_30_IB_ENG_121206_6.indd   8

12-12-06   11:18 AM