MTD TLP 2824-Z Manuel D’Utilisation
980533-001 A
TLP 2824-Z User Guide
37
4
Maintenance
Cleaning
When you clean the printer, use one of the following supplies that best suits your needs:
:
The cleaning process takes just a couple of minutes using the steps outlined below.
Cleaning Supplies
Cleaning pens (12)
Cleaning swabs (25)
Printer Part
Method
Interval
Print head
Let the print head to cool for a minute, then use a
new cleaning pen to swab the the thin gray line
on the print head from end to end.
NOTE: You do not have to turn off the printer to
do this.
new cleaning pen to swab the the thin gray line
on the print head from end to end.
NOTE: You do not have to turn off the printer to
do this.
When using ribbon:
after every roll of
ribbon; when using
direct thermal: after
every roll of media.
after every roll of
ribbon; when using
direct thermal: after
every roll of media.
Platen roller
See “Platen Considerations” in the Maintenance
chapter. Manually rotate the platen roller. Clean
it thoroughly with 95% medical-grade alcohol
and a cleaning swab, cleaning card, or lint-free
cloth.
chapter. Manually rotate the platen roller. Clean
it thoroughly with 95% medical-grade alcohol
and a cleaning swab, cleaning card, or lint-free
cloth.
As needed.
Peel bar
Clean it thoroughly with 95% medical-grade
alcohol and a cotton swab.
alcohol and a cotton swab.
Tear bar
Media path
Exterior
Water-dampened cloth.
Interior
Brush or air blow.
Cutter
Use tweezers to remove scraps.