Multiquip GB2000 Manuel D’Utilisation
page 18 —gb2000 balloon lighT• operaTion and parTs manual — rev. #3 (08/30/12)
type 1 COMpOnents (s/n G1900118 and belOw)
Figure 3. GB2000 Components
(Type 1 S/N G1900118 And Below)
1
2
5
3
4
1.
lamp Fixture — Made of heat resistant polyester
balloon, with a diameter of 35.5 inches (902 mm) and
two 1000 watt metal halide lamps.
2.
locking pin — Locks the lamp fixture in place when
attached to the pole on the bracket.
3.
bracket plate — Attaches to the Tbar and mast
interface of the light tower to allow the GB2000 to be
installed.
4.
Junction box — Holds the electrical connection and
cables to connect the lamp fixture to the TBar and to
the power cable.
5.
power Cable — Connects the lamp fixture from the
junction box to the GFCI receptacle of the generator
to provide power to inflate the balloon.
NOTICE
This bracket only fits on Multiquip light towers.