Mocomtech CDM-570 Manuel D’Utilisation

CDM-570/570L Satellite Modem with Optional IP Module 

Revision 4 

IP Module - CLI and Telnet Operation 

MN/CDM570L.IOM 

Dump Packets received 
from Ethernet Interface 

Toggles [Yes] and [No] 

Executing this menu option forces the 

IP M

odule to 

dump a hexadecimal representation of each packet that 
it receives from the Ethernet Interface.  

Dump Packets received by 
Router  

Toggle [Yes] and [No] 

Executing this menu option forces the 

IP M

odule to 

dump a hexadecimal representation of each packet that 
is received by the routing engine. (Note: Does not apply 
when in easyConnect

™ mode.) 

Dump Packets sent to 
EndStation 

Toggle [Yes] and [No] 

Executing this menu option forces the 

IP M

odule to 

dump a hexadecimal representation of each packet that 
is received by and destined for this modem. This traffic 
would include Pings, SNMP, Telnet, HTTP, and FTP 
types of traffic. 

Dump Packets received 
from EndStation 

Toggle [Yes] and [No] 

Executing this menu option forces the 

IP M

odule  to 

dump a hexadecimal representation of each packet that 
is sourced from this modem and destined for some other 
device. This allows a user to see what type of packets 
this modem is generating internally. 

Ping 

Enter the ip address in aaa.bbb.ccc.ddd format 

Traceroute 

Enter the ip address in aaa.bbb.ccc.ddd format 

Command Line Debug 
Prompt 

Enter the password to access the debug command line. 

Note: This is reserved for Customer Service and 
engineering use. 

Save Parameters 

This option allows a user to save the current 
configuration to permanent storage. This configuration 
will be restored on each successive power cycle. 

Exit 

This option allows a user to exit the current menu and 
return to its parent menu. 

 

17–76