Microsoft ES4625 Manuel D’Utilisation
Configuring the Switch
3-104
3
CLI – The following example displays the LACP configuration settings and
operational state for the remote side of port channel 1.
operational state for the remote side of port channel 1.
Setting Broadcast Storm Thresholds
Broadcast storms may occur when a device on your network is malfunctioning, or if
application programs are not well designed or properly configured. If there is too
much broadcast traffic on your network, performance can be severely degraded or
everything can come to complete halt.
application programs are not well designed or properly configured. If there is too
much broadcast traffic on your network, performance can be severely degraded or
everything can come to complete halt.
You can protect your network from broadcast storms by setting a threshold for
broadcast traffic for each port. Any broadcast packets exceeding the specified
threshold will then be dropped.
broadcast traffic for each port. Any broadcast packets exceeding the specified
threshold will then be dropped.
Command Usage
• Broadcast control does not effect IP multicast traffic.
• The resolution for Gigabit ports is 1 packet per second (pps); i.e., any setting
• Broadcast control does not effect IP multicast traffic.
• The resolution for Gigabit ports is 1 packet per second (pps); i.e., any setting
between 500-262143 is acceptable. However, the resolution for the 10 Gigabit port
is in steps of 1041 pps.
is in steps of 1041 pps.
Command Attributes
• Port
9
– Port number.
• Trunk
10
– Trunk number
• Type – Indicates the port type. (1000BASE-T, SFP, or 10G)
• Protect Status – Shows whether or not broadcast storm control has been enabled.
• Protect Status – Shows whether or not broadcast storm control has been enabled.
(Default: Enabled)
• Threshold – Threshold as percentage of port bandwidth.
(1000BASE - Options: 500-262143 packets per second; Default: 500 pps,
10GBASE - Options: 1041-262143 packets per second; Default: 1041 pps)
10GBASE - Options: 1041-262143 packets per second; Default: 1041 pps)
• Trunk
– Shows if port is a trunk member.
Console#show lacp 1 neighbors
Port channel 1 neighbors
-------------------------------------------------------------------------
Eth 1/2
-------------------------------------------------------------------------
-------------------------------------------------------------------------
Eth 1/2
-------------------------------------------------------------------------
Partner Admin System ID:
32768, 00-00-00-00-00-00
Partner Oper System ID:
32768, 00-01-F4-78-AE-C0
Partner Admin Port Number: 2
Partner Oper Port Number:
Partner Oper Port Number:
2
Port Admin Priority:
32768
Port Oper Priority:
32768
Admin Key:
0
Oper Key:
3
Admin State:
defaulted, distributing, collecting,
synchronization, long timeout,
synchronization, long timeout,
Oper State:
distributing, collecting, synchronization,
aggregation, long timeout, LACP-activity
aggregation, long timeout, LACP-activity
.
.
.
9. Port Broadcast Control
10. Trunk Broadcast Control
10. Trunk Broadcast Control