Microsoft ES4625 Manuel D’Utilisation
Class of Service Configuration
3-151
3
Web – Click Priority, Default Port Priority or Default Trunk Priority. Modify the default
priority for any interface, then click Apply.
priority for any interface, then click Apply.
Figure 3-86 Default Port Priority
CLI – This example assigns a default priority of 5 to port 3.
Console(config)#interface ethernet 1/3
Console(config-if)#switchport priority default 5
Console(config-if)#end
Console#show interfaces switchport ethernet 1/5
Console#show interfaces switchport ethernet 1/5
Information of Eth 1/5
Broadcast threshold:
Enabled, 500 packets/second
LACP status:
Disabled
Ingress rate limit:
Disable, 1000M bits per second
Egress rate limit:
Disable, 1000M bits per second
VLAN membership mode:
Hybrid
Ingress rule:
Disabled
Acceptable frame type:
All frames
Native VLAN:
1
Priority for untagged traffic: 0
GVRP status:
GVRP status:
Disabled
Allowed VLAN:
1(u),
Forbidden VLAN:
Console#