Microsoft ES4625 Manuel D’Utilisation
Interface Commands
4-153
4
Example
This example shows the configuration setting for port 4.
This example shows the configuration setting for port 4.
Console#show interfaces switchport ethernet 1/4
Broadcast threshold:
Enabled, 500 packets/second
LACP status:
Disabled
Ingress rate limit:
Disable, 1000M bits per second
Egress rate limit:
Disable, 1000M bits per second
VLAN membership mode:
Hybrid
Ingress rule:
Disabled
Acceptable frame type:
All frames
Native VLAN:
1
Priority for untagged traffic: 0
GVRP status:
GVRP status:
Disabled
Allowed VLAN:
1(u),
Forbidden VLAN:
Console#
Table 4-49 show interfaces switchport - display description
Field
Description
Broadcast threshold
Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-149).
LACP status
Shows if Link Aggregation Control Protocol has been enabled or disabled
Ingress/Egress rate limit
Shows if rate limiting is enabled, and the current rate limit (page 4-156).
VLAN membership mode Indicates membership mode as Trunk or Hybrid (page 4-191).
Ingress rule
Ingress rule
Shows if ingress filtering is enabled or disabled (page 4-192).
Acceptable frame type
Shows if acceptable VLAN frames include all types or tagged frames only
Native VLAN
Indicates the default Port VLAN ID (page 4-193).
Priority for untagged traffic Indicates the default priority for untagged frames (page 4-206).
GVRP status
GVRP status
Shows if GARP VLAN Registration Protocol is enabled or disabled
Allowed VLAN
Shows the VLANs this interface has joined, where “(u)” indicates untagged and
“(t)” indicates tagged (page 4-194).
Forbidden VLAN
Shows the VLANs this interface can not dynamically join via GVRP