Microsoft ES4612 Manuel D’Utilisation
Configuring the Switch
3-176
3
Configuring a Host Address Pool
Web – Click DHCP, Server, Pool Configuration. Click the Configure button for any
entry. Click the radio button for “Host.” Enter the IP address, subnet mask, and
hardware address for the client device. Configure the optional parameters such as
gateway server and DNS server. Then click Apply.
entry. Click the radio button for “Host.” Enter the IP address, subnet mask, and
hardware address for the client device. Configure the optional parameters such as
gateway server and DNS server. Then click Apply.
Figure 3-106 DHCP Server Pool - Host Configuration
CLI – This example configures a host address pool.
Console(config)#ip dhcp pool mgr
Console(config-dhcp)#host 10.1.0.19 255.255.255.0
Console(config-dhcp)#hardware-address 00-e0-29-94-34-28 ethernet
Console(config-dhcp)#client-identifier text bear
Console(config-dhcp)#default-router 10.1.0.253
Console(config-dhcp)#dns-server 10.2.3.4
Console(config-dhcp)#netbios-name-server 10.1.0.33
Console(config-dhcp)#netbios-node-type hybrid
Console(config-dhcp)#domain-name example.com
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#next-server 10.1.0.21
Console(config-dhcp)#lease infinite
Console(config-dhcp)#