Microsoft ES4612 Manuel D’Utilisation

Page de 666
Command Line Interface
4-168
4
Default Setting 
None
Command Mode 
Privileged Exec
Command Usage 
• The MAC Address Table contains the MAC addresses associated with each 
interface. Note that the Type field may include the following types:
- Learned - Dynamic address entries
- Permanent - Static entry
- Delete-on-reset - Static entry to be deleted when system is reset
• The mask should be hexadecimal numbers (representing an equivalent bit 
mask) in the form xx-xx-xx-xx-xx-xx that is applied to the specified MAC 
address. Enter hexadecimal numbers, where an equivalent binary bit “0” 
means to match a bit and “1” means to ignore a bit. For example, a mask of 
00-00-00-00-00-00 means an exact match, and a mask of 
FF-FF-FF-FF-FF-FF means “any.”
• The maximum number of address entries is 8191.
Example
mac-address-table aging-time
This command sets the aging time for entries in the address table. Use the no form 
to restore the default aging time.
Syntax 
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-1000000 seconds; 0 to disable aging)
Default Setting 
300 seconds
Command Mode 
Global Configuration
Command Usage 
The aging time is used to age out dynamically learned forwarding information.
Console#show mac-address-table
 Interface MAC Address       VLAN Type
 --------- ----------------- ---- -----------------
  Eth 1/ 1 00-e0-29-94-34-de    1 Delete-on-reset
Console#