Microsoft ES4612 Manuel D’Utilisation
IP Routing Commands
4-249
4
router rip
This command enables Routing Information Protocol (RIP) routing for all IP
interfaces on the router. Use the no form to disable it.
interfaces on the router. Use the no form to disable it.
Syntax
[no] router rip
Command Mode
Global Configuration
Default Setting
Disabled
Command Usage
• RIP is used to specify how routers exchange routing table information.
• This command is also used to enter router configuration mode.
• This command is also used to enter router configuration mode.
Example
Related Commands
timers basic
This command configures the RIP update timer, timeout timer, and garbage-
collection timer. Use the no form to restore the defaults.
collection timer. Use the no form to restore the defaults.
Syntax
timers basic update-seconds
no timers basic
no timers basic
update-seconds – Sets the update timer to the specified value, sets the
timeout time value to 6 times the update time, and sets the garbage-
collection timer to 4 times the update time.
(Range for update timer: 15-60 seconds)
timeout time value to 6 times the update time, and sets the garbage-
collection timer to 4 times the update time.
(Range for update timer: 15-60 seconds)
Command Mode
Router Configuration
ip rip authentication key Enables authentication for RIP2 packets and specifies keys
IC
ip rip authentication mode Specifies the type of authentication used for RIP2 packets
IC
show rip globals
Displays global configuration settings and statistics for RIP
PE
show ip rip
Displays RIP configuration information for each network interface PE
Console(config)#router rip
Console(config-router)#
Console(config-router)#
Table 4-82 Routing Information Protocol Commands
Command
Function
Mode Page