Meyer Sound MM-10 Manuel D’Utilisation

45

5. Repeat the previous steps to attach the EN3 5-pin female connector to the other end of the cable.

When connecting MM-10XP loudspeakers equipped with EN3 connectors to the MPS-488HPp power supply, you need an 
EN3 5-pin female to Phoenix 5-pin female cable. The following procedure documents how to assemble this cable. If you are 
starting with an EN3-to-pigtail cable (included with the MM-10XP), you can skip steps 4–7 in this procedure.

To assemble an EN3-to-Phoenix cable:

1. If cable has not been stripped, strip the outer shielding 1” and then strip the black, red, blue, and white wires .275”.

Pin #5, White, 

audio (+)

Pin #4, Blue, 

audio (–)

Pin #2, Red, 

48 V DC (+)

Pin #1, Black, 

48 V DC (–)

Pin #3, Unshielded, 

audio shield

Pin #5, White, 

audio (+)

Pin #4, Blue, 

audio (–)

REAR

FRONT

Dimple identifies Pin #1

1”

0.275”