Meritor Automobile Accessories MM-9902 Manuel D’Utilisation

7

can result.
1. Remove the brake linings. Refer to "Remove

the Linings" in this section.

2. Remove the clevis pin from the lever. 

3. Remove the chamber. Figure 3.4.
4. Remove the four saddle bolts.
5. Lift the caliper and saddle assembly away

from the disc. 

•

bracket: Mark the position of the shims.

5. Remove the stabilizer bar cotter pin and

retainer pin. Hinge the stabilizer bar so it is

out of the way. Figure 3.3.

6. Lift the inner lining out of the caliper

assembly. If you plan to reuse the lining,

mark the lining INBOARD.

7. Slide the caliper OUTWARD and remove the

outboard lining. If you plan to reuse the

lining, mark the lining OUTBOARD.

NOTE: If the caliper moves past its working

position and jams on the slide pins, use a rubber

mallet to move the caliper back to its working

range.
8. Verify that the caliper slides freely on the

slide pins.

9. Remove dirt and dust from the lining contact

surfaces of the saddle.

10. Inspect the caliper boots. If the boots are

damaged, replace the caliper/saddle

assembly.

11. Inspect the disc for wear and damage. Refer

to Section 5.